IA II Crank Scraper |
||
Back |
|
IA II Crank Scraper |
This new crank scraper is designed for the IA II block or race applications with 4 bolt or splayed caps.
Highly recommend for use with the IA II Windage Tray Buy both for better racing performance! Part# - IAII-WTRCS $179.00 | |
IA II Windage Tray and IA II Crank Scraper (without dipstick tube hole). Fasterners for windage tray included. Installation Notes Install tray by applying pressure until studs appear through installation holes. Screw on nuts and tighten. Windage tray may need to be shimmed to clear certain stroke/rod combinations. Shims should be made from rectangular stock - washers not recommended. Shimming more then 1/4" may not allow the oil pan to fit. Rotate crankshaft several times and check for clearance.It may be necessary to straighten louvers to clear connecting rods. Trays may need clearance by bending for certain oil pumps. It is best to fit all components. |
|
Note: If using a dipstick tube, drill a provisional hole in the scraper. |
Packaging and Handling $4.95 each order
Plus shipping charges
Crating charge for overseas shipping is $125.00 per crate. F.O.B. point of shipment origin.